Semiconductors and Electronic Devices: JEE Main PYQ with Solutions
60 questions asked in JEE Main 2024 to 2026, newest first. Every solution is free.
20questions in 2026
4.2%of Physics in 2026
1.1per paper on average
18 of 19papers asked it in 2026
| Year | Questions | Share of Physics | Per paper | Papers that asked it |
|---|---|---|---|---|
| 2026 | 20 | 4.2% | 1.1 | 18 of 19 |
| 2025 | 18 | 3.8% | 0.9 | 18 of 19 |
| 2024 | 22 | 3.7% | 1.1 | 20 of 20 |
Learn Semiconductors and Electronic Devices 1-on-1 with our faculty
Live classes with senior IITian faculty, only you and the teacher. Start with a 2-hour session and continue if you like it.
Type
Year
My status
- 8 Apr 2026 S2The output Y for the given inputs A and B to the circuit is:MCQ
- 6 Apr 2026 S2Refer to the logic circuit given below. For two inputs (A = 1, B = 1) and (A = 0, B = 1), output (Y) will be ____.MCQ
- 6 Apr 2026 S1The maximum rated power of the LED is 2 mW and it is used in the circuit with input voltage of 5 V as shown in the figure below. The current through…MCQ
- 5 Apr 2026 S2In a semiconductor p-n diode, the doping concentrations on p- side and n- side are 10^15 atoms /cm^3 and 10^18 atoms /cm^3, respectively. Which one…MCQ
- 5 Apr 2026 S1For the given logic circuit, which of the following inputs combination will make both LED – 1 and LED – 2 to glow?MCQ
- 4 Apr 2026 S2Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R Assertion A: A diode under reverse-biased…MCQ
- 4 Apr 2026 S2A diode has Zener voltage of 10 V and maximum power dissipation of 0.5 W, then the minimum resistance to be used in series with this diode for safety…Numerical
- 4 Apr 2026 S1Two 4 bits binary numbers, A = 1101 and B = 1010 are given in the inputs of a logic circuit shown in figure below. The output (Y) will be:MCQ
- 4 Apr 2026 S1Consider a circuit consisting of a capacitor (20 μ F), resistor (100 Ω) and two identical diodes as shown in figure. The resistance of diode under…MCQ
- 2 Apr 2026 S2If X and Y are the inputs, the given circuit works as ____.MCQ
- 2 Apr 2026 S1For the given circuit (shown in part (A)) the time dependent input voltage v_in(t) and corresponding output v_o(t) are shown in part (B) and part…MCQ
- 28 Jan 2026 S2Two p-n junction diodes D_1 and D_2 are connected as shown in figure. A and B are input signals and C is the output. The given circuit will function…MCQ
- 28 Jan 2026 S1Assuming in forward bias condition there is a voltage drop of 0.7 V across a silicon diode, the current through diode D_1 in the circuit is ____mA.…MCQ
- 24 Jan 2026 S2Identify the correct truth table of the given logic circuit.MCQ
- 24 Jan 2026 S1A voltage regulating circuit consisting of Zener diode, having break-down voltage of 10 V and maximum power dissipation of 0.4 W, is operated at 15…Numerical
- 23 Jan 2026 S2For the given logic gate circuit, which of the following is the correct truth table?MCQ
- 23 Jan 2026 S1The following diagram shows a Zener diode as a voltage regulator. The Zener diode is rated at V_z = 5 V and the desired current in load is 5 mA. The…MCQ
- 22 Jan 2026 S2The correct truth table for the given input data of the following logic gate is:MCQ
- 22 Jan 2026 S1Find the correct combination of A, B, C and D inputs which can cause the LED to glow.MCQ
- 21 Jan 2026 S1The given circuit works as:MCQ
- 8 Apr 2025 S2The output voltage in the following circuit is (Consider ideal diode case)MCQ
- 7 Apr 2025 S2Consider the following logic circuit. The output is Y = 0 when:MCQ
- 7 Apr 2025 S1In the following circuit, the reading of the ammeter will be: (Take Zener breakdown voltage = 4V.)MCQ
- 4 Apr 2025 S2Consider a n-type semiconductor in which n_e and n_h are number of electrons and holes, respectively. (A) Holes are minority carriers (B) The dopant…MCQ
- 4 Apr 2025 S1The Boolean expression Y = A BC + A C can be realised with which of the following gate configurations. A. One 3-input AND gate, 3 NOT gates and one…MCQ
- 3 Apr 2025 S2The truth table corresponding to the given circuit is:MCQ
- 3 Apr 2025 S1Choose the correct logic circuit for the given truth table having inputs A and B. Input A Input B Output Y 0 0 0 0 1 0 1 0 1 1 1 1MCQ
- 2 Apr 2025 S2In the digital circuit shown in the figure, for the given inputs the P and Q values are:MCQ
- 2 Apr 2025 S1A zener diode with 5 V zener voltage is used to regulate an unregulated dc voltage input of 25 V. For a 400 Ω resistor connected in series, the zener…MCQ
- 29 Jan 2025 S2The truth table for the circuit given below is:MCQ
- 29 Jan 2025 S1For the circuit shown above, equivalent GATE is:MCQ
- 28 Jan 2025 S2In the circuit shown here, assuming threshold voltage of diode is negligibly small, then voltage V_AB is correctly represented by:MCQ
- 28 Jan 2025 S1Which of the following circuits has the same output as that of the given circuit?MCQ
- 24 Jan 2025 S2The output of the circuit is low (zero) for: (A)X = 0,Y = 0 (B)X = 0,Y = 1 (C)X = 1,Y = 0 (D)X = 1,Y = 1 Choose the correct answer from the options…MCQ
- 24 Jan 2025 S1Consider the following statements: A. The junction area of solar cell is made very narrow compared to a photo diode. B. Solar cells are not connected…MCQ
- 23 Jan 2025 S2What is the current through the battery in the circuit shown belowMCQ
- 22 Jan 2025 S2A B Y 0 0 1 0 1 1 1 0 0 1 1 1 To obtain the given truth table, following logic gate should be placed at G:MCQ
- 22 Jan 2025 S1Which of the following circuits represents a forward biased diode? Choose the correct answer from the options given below:MCQ
- 9 Apr 2024 S2The I – V characteristics of an electronic device shown in the figure. The device is:MCQ
- 9 Apr 2024 S2A B E 0 0 0 0 1 X 1 0 Y 1 1 0 In the truth table of the above circuit the value of X and Y are:MCQ
- 9 Apr 2024 S1A light emitting diode (LED) is fabricated using GaAs semiconducting material whose band gap is 1.42 eV. The wavelength of light emitted from the LED…MCQ
- 8 Apr 2024 S2A potential divider circuit is connected with a dc source of 20 V, a light emitting diode of glow in voltage 1.8 V and a zener diode of breakdown…Numerical
- 8 Apr 2024 S1The output Y of following circuit for given inputs is:MCQ
- 6 Apr 2024 S2The acceptor level of a p-type semiconductor is 6 eV. The maximum wavelength of light which can create a hole would be: Given hc=1242 eV nm.MCQ
- 6 Apr 2024 S1The correct truth table for the following logic circuit is:MCQ
- 5 Apr 2024 S2The output (Y) of logic circuit given below is 0 only when:MCQ
- 5 Apr 2024 S1Following gates section is connected in a complete suitable circuit. For which of the following combination, bulb will glow (ON):MCQ
- 4 Apr 2024 S2Identify the logic gate given in the circuit:MCQ
- 4 Apr 2024 S2Which of the diode circuit shows correct biasing used for the measurement of dynamic resistance of p-n junction diode:MCQ
- 4 Apr 2024 S1The value of net resistance of the network as shown in the given figure is:MCQ
- 1 Feb 2024 S2Conductivity of a photodiode starts changing only if the wavelength of incident light is less than 660 nm. The band gap of photodiode is found to be…MCQ
- 1 Feb 2024 S1In the given circuit if the power rating of Zener diode is 10 mW, the value of series resistance R_s to regulate the input unregulated supply is:MCQ
- 31 Jan 2024 S2The output of the given circuit diagram is (1) A B Y (2) A B Y 0 0 0 0 0 0 1 0 0 1 0 1 0 1 0 0 1 1 1 1 1 1 1 0 (3) A B Y (4) A B Y 0 0 0 0 0 0 1 0 0…MCQ
- 31 Jan 2024 S1Identify the logic operation performed by the given circuit.MCQ
- 30 Jan 2024 S2In the given circuit, the voltage across load resistance (R_L) is:MCQ
- 30 Jan 2024 S1A Zener diode of breakdown voltage 10 V is used as a voltage regulator as shown in the figure. The current through the Zener diode isMCQ
- 29 Jan 2024 S2The truth table for this given circuit is:MCQ
- 29 Jan 2024 S1In the given circuit, the breakdown voltage of the Zener diode is 3.0 V. What is the value of I_z?MCQ
- 27 Jan 2024 S2The truth table of the given circuit diagram is:MCQ
- 27 Jan 2024 S1Which of the following circuits is reverse-biased?MCQ
