JEE Prep Master

Reading mode

Text size

JEE Main 6 April 2026 Shift 1: Physics Question 39

Semiconductors and Electronic DevicesSingle correct option+4 / −1

The maximum rated power of the LEDLED is 2mW2 mW and it is used in the circuit with input voltage of 5 V5\,\mathrm{V} as shown in the figure below. The current through resistance RS{R}_{S} is 0.5 mA0.5\,\mathrm{mA}.
The minimum value of the resistance of RS{R}_{S}, to ensure that the LEDLED is not damaged is ________kΩ\_\_\_\_\_\_\_\_ k\Omega.

LED circuit with series resistor R_S and reverse-biased diode branch

Show answer and solution

Correct answer: Option 2

With the battery polarity shown, the ordinary diode in the 1k Ω1 k\,\mathrm{\Omega } branch is reverse biased. Under the ideal-diode, no-breakdown model that branch carries no current, so all of the 0.5 mA0.5\,\mathrm{mA} through RS{R}_{S} flows through the LEDLED.

The LEDLED power is PLED=VLEDI{P}_{LED} = {V}_{LED}I. Requiring PLED ≤2mW{P}_{LED}\ \le 2 mW at I=0.5 mAI = 0.5\,\mathrm{mA} gives VLED ≤ (2mW)(0.5 mA)={V}_{LED}\ \le \ \frac{(2 mW)}{(0.5\,\mathrm{mA})} = 4 V4\,\mathrm{V}.

Kirchhoff’s voltage law gives VLED=5−IRS{V}_{LED} = 5 - I{R}_{S}. Thus 5−(0.5× 10−3)RS ≤45 - (0.5 \times \ {10}^{-3}){R}_{S}\ \le 4, so RS ≥2000 Ω{R}_{S}\ \ge 2000 \,\mathrm{\Omega }.

The minimum resistance under the stated-current idealized model is 2k Ω2 k\,\mathrm{\Omega }, option 22. A practical LEDLED design would additionally require its current–voltage characteristic; the result here uses the current already specified in the question.

More Semiconductors and Electronic Devices questions

All 38 Semiconductors and Electronic Devices questions