JEE Prep Master

Reading mode

Text size

JEE Main 5 April 2026 Shift 1: Physics Question 43

Properties of Solids and LiquidsSingle correct option+4 / −1

Two wires as shown in the figure below, made of steel and have breaking stress of 12× 108  Nm212 \times \ {10}^{8}\ \,\frac{\mathrm{N}}{\mathrm{m}^{2}}. Area of cross-section of upper wire is 0.008cm20.008 {\mathrm{cm}}^{2} and of lower wire is 0.004cm20.004 {\mathrm{cm}}^{2}. The maximum mass that can be added to pan without breaking any wire is ______kg\_\_\_\_\_\_ \mathrm{kg}.
(take g=10 ms2)g = 10 \,\frac{\mathrm{m}}{\mathrm{s}^{2}})

Upper and lower steel wires suspend 30 kg and 10 kg masses with a pan below.

Show answer and solution

Correct answer: Option 2

Convert the areas: Aupper=8× 10−7 m2{A}_{\text{upper}} = 8 \times \ {10}^{-7}\ {m}^{2} and Alower=4× 10−7 m2{A}_{\text{lower}} = 4 \times \ {10}^{-7}\ {m}^{2}. The maximum tensions are σA=960 N\sigma A = 960\,\mathrm{N} and 480 N480\,\mathrm{N}, respectively.

For an added mass mm in the pan, the upper wire carries (m+30+10) g(m + 30 + 10)\,\mathrm{g} and the lower wire carries (m+10) g(m + 10)\,\mathrm{g}, neglecting wire and pan masses. The constraints are 10(m+40)≤96010(m + 40) \le 960 and 10(m+10)≤48010(m + 10) \le 480.

These give m≤56 kgm \le 56\,\mathrm{kg} and m≤38 kgm \le 38\,\mathrm{kg}. The lower wire is limiting, so the maximum added mass is 38 kg38\,\mathrm{kg}, option 22.

More Properties of Solids and Liquids questions

All 128 Properties of Solids and Liquids questions