JEE Prep Master

Reading mode

Text size

JEE Main 21 January 2026 Shift 2: Physics Question 27

Properties of Solids and LiquidsSingle correct option+4 / −1

Surface tension of two liquids (having same densities), T1{T}_{1} and T2{T}_{2}, are measured using capillary rise method utilizing two tubes with inner radii of r1{r}_{1} and r2{r}_{2} where r1>r2{r}_{1} > {r}_{2}. The measured liquid heights in the tubes are h1{h}_{1} and h2{h}_{2} respectively. [Ignore the weight of the liquid about the lowest point of meniscus]. The heights h1{h}_{1} and h2{h}_{2} and surfaces tensions T1{T}_{1} and T2{T}_{2} satisfy the relation:

Show answer and solution

Correct answer: Option 3

The capillary force balance is 2πrTcos⁡θ=πr2hρ g2\pi rT \cos \theta = \pi {r}^{2}h\rho \,\mathrm{g}, so h=2Tcos⁡θ/(ρgr)h = 2T \cos \theta /(\rho gr). For the two liquids, h1/h2=(T1cos⁡θ1)(T2cos⁡θ2){h}_{1}/{h}_{2} = \frac{({T}_{1} \cos {\theta }_{1})}{({T}_{2} \cos {\theta }_{2})} × r2r1\times \ \frac{{r}_{2}}{{r}_{1}}.

Assume equal surface tensions and equal contact angles. Then T1=T2{T}_{1} = {T}_{2} and h1/h2=r2r1<1{h}_{1}/{h}_{2} = \frac{{r}_{2}}{{r}_{1}} < 1. This gives h1<h2{h}_{1} < {h}_{2} and T1=T2{T}_{1} = {T}_{2}, option 33, which follows from these assumptions.

As\text{As} equal densities alone do not establish equal surface tensions or contact angles, these are additional assumptions used here.

More Properties of Solids and Liquids questions

All 128 Properties of Solids and Liquids questions