JEE Prep Master

Reading mode

Text size

JEE Main 29 January 2025 Shift 1: Physics Question 46

Properties of Solids and LiquidsNumerical answer+4 / −1

In a hydraulic lift, the surface area of the input piston is 6cm26{\mathrm{cm}}^{2} and that of the output piston is 1500cm2.1500{\mathrm{cm}}^{2}. If 100 N force is applied to the input piston to raise the output piston by 20 cm, then the work done is ____ kJ.

Show answer and solution

Correct answer: 5

For an ideal hydraulic lift, the transmitted pressure is the same at both pistons: FinAin=FoutAout.\frac{F_{\text{in}}}{A_{\text{in}}} = \frac{F_{out}}{A_{out}}. Thus Fout=100×(15006)=25000N.F_{out} = 100 \times \left( \frac{1500}{6} \right) = 25000N.

The output piston rises by 20cm=0.20m,20\mathrm{cm} = 0.20m, so the work done on the load is W=Fouthout=25000×0.20=5000J=5kJ.W = F_{out}h_{out} = 25000 \times 0.20 = 5000J = 5\mathrm{kJ}.

The input work is the same in the lossless model. Conservation of fluid volume gives hin=(15006)×0.20=50m,h_{\text{in}} = \left( \frac{1500}{6} \right) \times 0.20 = 50m, and 100×50=5000J.100 \times 50 = 5000J. The numerical entry is 5.

More Properties of Solids and Liquids questions

All 128 Properties of Solids and Liquids questions