JEE Prep Master

Reading mode

Text size

JEE Main 6 April 2024 Shift 2: Physics Question 25

CapacitanceNumerical answer+4 / −1

A capacitor of 10 μF10\,\mu\mathrm{F} capacitance whose plates are separated by 10 mm10\,\mathrm{mm} through air and each plate has area 4 cm24\,{\mathrm{cm}}^{2} is now filled equally with two dielectric media of K1=2K_{1}=2, K2=3K_{2}=3 respectively as shown in figure. If new force between the plates is 8 N8\,N. The supply voltage is ______ VV.

Two horizontal capacitor plates separated by d contain equal-width side-by-side regions labelled K1 = 2 and K2 = 3. The right region is hatched.

Show answer and solution

Correct answer: 80

Use the supplied air capacitance C0=10 μFC_{0}=10\,\mu\mathrm{F}. The two dielectrics occupy equal areas and the full plate separation, so they form parallel capacitors. Their combined capacitance is C=K1+K22C0=2+32(10)=25 μFC=\frac{K_{1}+K_{2}}{2}C_{0}=\frac{2+3}{2}(10)=25\,\mu\mathrm{F}.

For the ideal parallel-plate model, the attractive force magnitude is F=CV2/(2d)F=CV^{2}/(2d). Equivalently, this follows by adding the electric pressures on the two equal-area regions. Therefore V=2Fd/C=2(8)(10−2)25×10−6=80 VV=\sqrt{2Fd/C}=\sqrt{\frac{2(8)\left( 10^{-2} \right)}{25\times 10^{-6}}}=80\,V. The numerical answer is 80.

This calculation treats the stated capacitance as the given electrical parameter.

The stated area and air gap give an ideal-air capacitance of about 3.54×10−13 F3.54 \times 10^{- 13}\ F, not the stated 10 μF10\ \mu F. Thus the geometric data and the stated capacitance are not mutually consistent for an ideal air capacitor. The 80 V uses the supplied capacitance as the electrical parameter.

More Capacitance questions

All 46 Capacitance questions